| About |
|---|
| Solef® 5140 PVDF is an ultra high viscosity grade that gives superior adhesion and ultra high viscosity at reduced binder content, ideal for its use as binder in Lithium Ion Batteries.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,Latin America,Europe,Asia Pacific,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.75-1.78 | g/cm³ | ISO 1183 |
| Water Absorption | |||
| 24 hr，23℃ | <0.2 | % | ASTM D543 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Modulus | 1000-1700 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass Transition Temperature | -40 | ℃ | DSC |
| Melting temperature | 160-168 | ℃ | ASTM D3418 |
| Peak Crystallization Temperature (DSC) | 135-145 | ℃ | ASTM D3418 |
| Heat of Fusion | 40-50 | J/g | ASTM D3418 |
| Thermal Stability | >375 | ℃ | TGA |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface Resistivity | >1E14 | ohms | ASTM D257 |
| Volume Resistance | >1E14 | ohms·cm | ASTM D257 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 30g |
| 3. 0.039 in/min |
| 4. 80°C to end of melting |
| 5. @ 1% weight loss |
| 6. Voltage < 1V, after 2 min - 500 V @ 23°C |
| 7. Intensity = 10 mA, after 2 min @ 23°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |