| About |
|---|
| Repol SRM250NC is recommended for Injection Moulding and stretch blow moulding process. It is an ideal material to use in making high clarity containers, houseware, syringes and ISBM products. THe grade contains clarifier and antistatic agent that reduces static charge build-up on products. Repol SRM250NC complies with the systemic and intracutaneous tests with four different extractants as per USP XXIX and I.P. 96. The grade also complies with undue toxicity test as per E.P. and skin irritation test as per I.S.&& |
| Product Description | |
|---|---|
| Supplier | Reliance |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Food contact compliance |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 25 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 100 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I, 2.0 in/min |
| 3. Second Heating |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |