VECTOR® 4411-D

About
VECTOR® 4411-D是一种苯乙烯-异戊二烯-苯乙烯嵌段共聚物 (SIS)产品,。它可以通过吹塑成型、挤出或注射成型进行加工,在北美洲有供货。典型应用领域为:食品接触应用。主要特性为:共聚物。&&

Product Description
Generic	SIS
Material Status	Commercial: Active
Features	Copolymer
Availabilitys	North America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.958	g/cm³	ASTM D792
Melt Flow Rate
200℃，5.0kg	40	g/10min	ASTM D1238
Shrinkage rate
MD	1.2 to 1.4	%	ASTM D955

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	87		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	20.7	MPa	ASTM D412
300% strain	2.90	MPa	ASTM D412
Tensile strain
fracture	750	%	ASTM D412

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	149 to 204	°C
Mold temperature	10.0 to 40.6	°C
Injection pressure	34.5 to 138	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.