Derakane® 8084

About
DERAKANE 8084 epoxy vinyl ester resin is an elastomer modified resin designed to offer increased adhesive strength, superior resistance to abrasion and severe mechanical stress, while giving greater toughness and elongation. DERAKANE 8084 resin is the resin of choice as a primer to prepare a substrate surface (steel or concrete) for application of a corrosion resistant lining. It exhibits outstanding adhesive strength on different types of steel, aluminium and concrete. APPLICATIONS AND USE DERAKANE 8084 resin has exhibited chemical resistance across a broad range of acids, bases and organic chemicals. DERAKANE 8084 resin can be used for RTM, hand-lay up, spray-up, filament winding and other industrial FRP applications.&&

About

DERAKANE 8084 epoxy vinyl ester resin is an elastomer modified resin designed to offer increased adhesive strength, superior resistance to abrasion and severe mechanical stress, while giving greater toughness and elongation. DERAKANE 8084 resin is the resin of choice as a primer to prepare a substrate surface (steel or concrete) for application of a corrosion resistant lining. It exhibits outstanding adhesive strength on different types of steel, aluminium and concrete. APPLICATIONS AND USE DERAKANE 8084 resin has exhibited chemical resistance across a broad range of acids, bases and organic chemicals. DERAKANE 8084 resin can be used for RTM, hand-lay up, spray-up, filament winding and other industrial FRP applications.&&

Product Description
Generic	乙烯基酯
Material Status	Commercial: Active
Features	Alkali resistant,Acidproof,Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ISO 1183
Solution viscosity	360	mPa·s
styrene content	40	%

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam	480	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	82.2	℃	ASTM D648
1.8 MPa, unannealed	82.0	℃	ISO 75-2/A
Glass transition temperature	115	℃	ASTM D3418 , ISO 11357-2

Supplementary information	Nominal value	Unit	Test method
Volume contraction	8.2	%

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	30		ASTM D2583
Tensile modulus	2900	MPa	ASTM D638 , ISO 527-2
tensile strength
—	75.8	MPa	ASTM D638
—	76.0	MPa	ISO 527-2
Tensile strain
yield	8.0 to 10	%	ASTM D638 , ISO 527-2
Bending modulus
—	3310	MPa	ASTM D790
—	3300	MPa	ISO 178
bending strength
—	131	MPa	ASTM D790
—	130	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.