AFFINITY™ GP 1570

About
Low Viscosity Polyolefin Elastomer AFFINITY™ GP 1570 Polyolefin Plastomer (POP) is produced via INSITE™ Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives. It complies with: US FDA 21 CFR 175.105 EU 10/2011 Consult the regulations for complete details.&&

About

Low Viscosity Polyolefin Elastomer AFFINITY™ GP 1570 Polyolefin Plastomer (POP) is produced via INSITE™ Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives. It complies with: US FDA 21 CFR 175.105 EU 10/2011 Consult the regulations for complete details.&&

Product Description
Supplier	DOW
Generic	POP
Material Status	Commercial: Active
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.890	g/cm³	ASTM D792
Gardner color	< 2.00		ASTM D3417
Volatiles	< 0.15	%	ASTM D3030
Brookfield viscosity
177℃	13	mPa·s	ASTM D3236

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.