About |
---|
SILVER® Polycarbonate is applied to many fields, such as automobiles, office automation equipments, electronics, medical equipments and sports equipments. In addition, the custom—made products should be developed by buyers‘ requirements in order to meet special usage. Halogen-free Flame Retardant PC Characteristic: UL-94 V0/1 .5mm, excellent impact strength Application: charger, ammeter and other electric parts&& |
Product Description | |
---|---|
Supplier | Silver Age |
Generic | Polycarbonate |
Material Status | Commercial: Active |
Features | High impact resistance,Halogen free,Flame Characteristics,V-0 |
Availabilitys | Asia Pacific |
Process Methods | Injection Molding |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.19 | g/cm³ | ASTM D792 |
Melt Flow Rate | |||
300℃,1.20kg | 9.0 | g/10min | ASTM D1238 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
tensile strength | 59.0 | MPa | ASTM D638 |
Tensile strain | |||
fracture | 130 | % | ASTM D638 |
Bending modulus | 2050 | MPa | ASTM D790 |
bending strength | 75.0 | MPa | ASTM D790 |
IMPACT | Nominal value | Unit | Test method |
---|---|---|---|
Impact strength of cantilever beam notch | |||
23℃ | 75.0 | kJ/m² | ASTM D256 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Hot deformation temperature | |||
0.45 MPa, unannealed | 140 | ℃ | ASTM D648 |
FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
---|---|---|---|
Flame retardant level | |||
1.50 mm | V-0 | UL 94 |
Process Conditions | |||
---|---|---|---|
injection | Nominal value | Unit | Test method |
Processing (melt) temperature | 265 to 315 | °C |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |