| About |
|---|
| Kynar® film 252 PGM TR is a flexible thermoplastic fluorinated film. The properties are the same as standard grade: chemical resistance, resistance to UV, low permeation, high purity, excellent mechanical behavior. These films are specially designed for photovoltaic applications.&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PVDF |
| Material Status | Commercial: Negative |
| Features | Weather resistance is good,High purity,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 0.20 | % | ISO 62 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3 | ||
| MD, yield, 25 µ m, blow molded film | 30.0 | MPa | ISO 527-3 |
| TD, yield, 25 µ m, blow molded film | 30.0 | MPa | ISO 527-3 |
| MD, fracture, 25 µ m, blow molded film | 30.0 | MPa | ISO 527-3 |
| TD, fracture, 25 µ m, blow molded film | 30.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, yield, 25 µ m, blow molded film | 7.0 | % | ISO 527-3 |
| TD, yield, 25 µ m, blow molded film | 7.0 | % | ISO 527-3 |
| MD, fracture, 25 µ m, blow molded film | 150 | % | ISO 527-3 |
| TD, fracture, 25 µ m, blow molded film | 150 | % | ISO 527-3 |
| Pant tear resistance | ISO 6383-1 | ||
| MD: 25 µ m, blow molded film | 2.00 | N/mm | ISO 6383-1 |
| TD: 25 µ m, blow molded film | 3.00 | N/mm | ISO 6383-1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 100 | kV/mm | IEC 60243-1 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |