Eltex® P KS341

About
Polypropylene – Heat Seal Benefits & Features ELTEX® P KS341 is a propylene/alpha olefin random copolymer specially developed for the sealing layers of “coextruded bioriented film” for food and technical packaging. It features an extremely low sealing temperature (below 100°C) and contains anti-block additives. Specially developed for the sealing layers of “coextruded bioriented film” for food and technical packaging Extremely low sealing temperature (below 100°C) Contains anti-block additives Applications Propylene/alpha olefin random copolymer specially developed for the sealing layers of “coextruded bioriented film” (Tenter & blown film process)&&

About

Polypropylene – Heat Seal Benefits & Features ELTEX® P KS341 is a propylene/alpha olefin random copolymer specially developed for the sealing layers of “coextruded bioriented film” for food and technical packaging. It features an extremely low sealing temperature (below 100°C) and contains anti-block additives. Specially developed for the sealing layers of “coextruded bioriented film” for food and technical packaging Extremely low sealing temperature (below 100°C) Contains anti-block additives Applications Propylene/alpha olefin random copolymer specially developed for the sealing layers of “coextruded bioriented film” (Tenter & blown film process)&&

Product Description
Supplier	INEOS
Generic	PP copolymer
Material Status	Commercial: Active
Features	High anti-blocking,Food contact compliance,Random copolymer,Low temperature heat sealing
Availabilitys	Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.895	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	7.3	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 23 ℃	55		ISO 868
tensile strength
Yield, 23 ℃	20.0	MPa	ISO 527-2
Bending modulus
23℃	450	MPa	ISO 178

film	Nominal value	Unit	Test method
Heat Seal Threshold	92	℃	Internal Method

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	47.0	℃	ISO 75-2/B
Vicat Softening Temp
A50	95.0	℃	ISO 306/A50
Melting peak temperature	115	℃	ASTM D3417

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.