TOTAL Polyethylene HDPE XSC50 Orange

About
HDPE XSC50 Orange is a high performance hexene-based orange compound, with a MRS 10 MPa – PE 100 classification, and primarily intended for gas pipe applications. HDPE XSC50 Orange key characteristics are: superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service. Designation ISO 1872-PE,E/M-ACGHL,50-T003&&

About

HDPE XSC50 Orange is a high performance hexene-based orange compound, with a MRS 10 MPa – PE 100 classification, and primarily intended for gas pipe applications. HDPE XSC50 Orange key characteristics are: superior resistance to slow crack growth and rapid crack propagation ensuring safe and long-term network operation a broad bimodal molecular weight distribution offering easy processing for perfect pipes and fittings an optimised formulation of additives and finely dispersed pigments providing outstanding long-term stability in service. Designation ISO 1872-PE,E/M-ACGHL,50-T003&&

Product Description
Supplier	TOTAL
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Wide molecular weight distribution,Bimodal molecular weight distribution,Hexene copolymers
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ISO 1183
Melt Flow Rate
190℃，5.0kg	0.30	g/10min	ISO 1133
water content	< 300	ppm	EN 12118

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	132	℃	ASTM D3417
thermal stability
200℃	> 20	min	ISO 11357-6
200℃	> 20	min	EN 12118

Supplementary information	Nominal value	Unit	Test method
Pigment dispersion	< 3.00		ISO 18553

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Processing (melt) temperature	200 to 260	°C
Melt temperature	190 to 220	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.