Propylux® Unfilled

About
Propylux is made from polypropylene resin. Among its most notable characteristics are its mechanical toughness, chemical resistance, and resistance to abrasion. These properties make it suitable for various applications. Propylux Natural, and Void Free are FDA compliant. Applications Include: Tanks/tank covers Welding cabinetry Etching rinse tubs Glove boxes Cutting board Fan shrouds and blades Advantages of Propylux: Excellent chemical resistance Superior dimensional stability Low moisture absorption Low density Formable and weldable FDA, USDA&&

About

Propylux is made from polypropylene resin. Among its most notable characteristics are its mechanical toughness, chemical resistance, and resistance to abrasion. These properties make it suitable for various applications. Propylux Natural, and Void Free are FDA compliant. Applications Include: Tanks/tank covers Welding cabinetry Etching rinse tubs Glove boxes Cutting board Fan shrouds and blades Advantages of Propylux: Excellent chemical resistance Superior dimensional stability Low moisture absorption Low density Formable and weldable FDA, USDA&&

Product Description
Supplier	Westlake Plastics
Generic	PP not specified
Material Status	Commercial: Active
Features	Good flexibility,Good Dimensional Stability,Food contact compliance,Low density,Good wear resistance,Solvent resistance,Welding,Low moisture absorption,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.908	g/cm³	ASTM D792
Water absorption rate
24hr	< 0.10	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	37	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature			ASTM D648
0.45 MPa, unannealed	98.9	℃	ASTM D648
1.8 MPa, unannealed	54.4	℃	ASTM D648
Continuous use temperature	82.2	℃
Melting temperature	166	℃	ASTM D4591
Linear coefficient of thermal expansion
MD	1.5E-4	1/℃	ASTM D696
Thermal conductivity coefficient	0.40	W/m/K	ASTM C177

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	24	kV/mm	ASTM D149
Dielectric constant
1 kHz	2.30		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	95		ASTM D785
Tensile modulus	1650	MPa	ASTM D638
tensile strength
yield	35.9	MPa	ASTM D638
Tensile strain
fracture	600	%	ASTM D638
Bending modulus	827	MPa	ASTM D790
bending strength	48.3	MPa	ASTM D790
compressive strength	41.4	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.