| About |
|---|
| Product Description | |
|---|---|
| Supplier | Maoming |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 1.80-2.00 | g/10min | ASTM D570 |
| Process Conditions | |||
|---|---|---|---|
| injection molding | Nominal value | Unit | Test method |
| drying temperature | 60-90 | ℃ | |
| Drying time | 2.0-6.0 | hrs | |
| Suggested moisture content | ≤0.20 | % | |
| Temperature at the rear of the barrel | 200-260 | ℃ | |
| Temperature in the middle of the barrel | 210-270 | ℃ | |
| Front temperature of material barrel | 220-280 | ℃ | |
| Nozzle temperature | 230-290 | ℃ | |
| Mold temperature | 20-90 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |