| About |
|---|
| Caltex PP M540是一种聚丙烯扩冲击共聚物(PP Impact Copoly)材料,。 该产品在亚太地区有供货,加工方式为:注射成型。 Caltex PP M540的主要特性有: 阻燃/额定火焰 耐冲击 典型应用领域包括: 电气/电子应用 电气用具 房屋 工业应用 汽车行业&& |
| Product Description | |
|---|---|
| Supplier | GS Caltex |
| Generic | PP homopolymerization |
| Material Status | Commercial: Active |
| Features | High impact resistance,HB |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| Shrinkage rate | ASTM D955 | ||
| MD | 1.5 to 1.8 | % | ASTM D955 |
| TD | 1.5 to 1.8 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 98 | J/m | ASTM D256 |
| Drop hammer impact | 15.7 | J | ASTM D3029 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 115 | ℃ | ASTM D648 |
| Vicat Softening Temp | 150 | ℃ | ASTM D1525 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 86 | ASTM D785 | |
| tensile strength | |||
| yield | 27.5 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 10 | % | ASTM D638 |
| fracture | > 500 | % | ASTM D638 |
| Bending modulus | 1180 | MPa | ASTM D790A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |