BIOLLOY KH420 - SOLIAO

About
BIOLLOY KH420 is a Polylactic Acid + ABS (PLA+ABS) product. It is available in Asia Pacific, Europe, Latin America, or North America. Characteristics include: Flame Rated Eco-Friendly/Green Heat Resistant&&

Product Description
Supplier	Techno
Generic	PLA+ABS
Material Status	Commercial: Active
Features	Good Dimensional Stability,Good liquidity,Foaming performance,Quick molding cycle,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	ISO 1183
Melt Flow Rate
220℃，10.0kg	20	g/10min	ISO 1133
Shrinkage rate	0.50 to 0.80	%	ISO 294-4

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	17	kJ/m²	ISO 179

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	106	℃	ISO 75-2/B
1.8 MPa, unannealed	78.0	℃	ISO 75-2/A

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
All colors	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	118		ISO 2039-2
tensile strength
yield	63.0	MPa	ISO 527-2
Bending modulus	2840	MPa	ISO 178
bending strength	95.0	MPa	ISO 178

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80	°C
Barrel rear temperature	190 to 260	°C
Barrel middle temperature	190 to 260	°C
Barrel front temperature	190 to 260	°C
Mold temperature	40 to 80	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.