| About |
|---|
| Product Description | |
|---|---|
| Supplier | Chang Chun |
| Generic | PPSU |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
| Flame retardant level | |||
| 0.75 mm | V-0 | UL 94 | |
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 | |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot wire ignition (HWI) | |||
| 0.75 mm | PLC 1 | UL 746 | |
| 1.5 mm | PLC 1 | UL 746 | |
| 3.0 mm | PLC 1 | UL 746 | |
| High Arc Burning Index (HAI) | |||
| 0.75 mm | PLC 0 | UL 746 | |
| 1.5 mm | PLC 0 | UL 746 | |
| 3.0 mm | PLC 0 | UL 746 | |
| Compared to the leakage tracing index | PLC 4 | UL 746 | |
| High voltage arc marking rate (HVTR) | PLC 3 | UL 746 | |
| Arc resistance | PLC 5 | ASTM D495 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Relative temperature index | |||
| Electrical performance | 50 | ℃ | UL 746 |
| Impact mechanical performance | 50 | ℃ | UL 746 |
| Non mechanical impact performance | 50 | ℃ | UL 746 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |