Westlake LLDPE LF2010

About
Westlake LF2010 is a hexene LLDPE with increased stiffness suitable for blown heavy duty films and shipping sacks. This material contains process aid for improved ease of extrusion, and can be blended with LDPE for strength property enhancements. Application/Uses Bags and sacks Agricultural films Trash bags and liners Co-extruded structures&&

Product Description
Supplier	Westlake Chemical
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Features	Excellent Processability,Hexene copolymers
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.926	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.85	g/10min	ASTM D1238

film	Nominal value	Unit	Test method
film thickness
test	25	µm
Secant modulus
1% secant, TD, 25 µ m, blow molded film	372	MPa	ASTM D882
1% secant, MD, 25 µ m, blow molded film	283	MPa	ASTM D882
tensile strength
TD, fracture, 25 µ m, blow molded film	41.4	MPa	ASTM D882
MD, fracture, 25 µ m, blow molded film	44.8	MPa	ASTM D882
Tensile strain
TD, fracture, 25 µ m, blow molded film	900	%	ASTM D882
MD, fracture, 25 µ m, blow molded film	700	%	ASTM D882
Drop hammer impact
25 µ m, blow molded film	100	g	ASTM D1709
tear strength
TD, 25 µ m, blow molded film	880	g	ASTM D1922
MD, 25 µ m, blow molded film	140	g	ASTM D1922

optical performance	Nominal value	Unit	Test method
Haze
25.4 µ m, blow molded film	15	%	ASTM D1003

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	216 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.