BIOPLAST® Wrap 100

About
BIOPLAST WRAP 100 is BIOTEC’s trademark for a completely new, plasticizer-free thermoplastic material, which allows the production of films with paper-like properties. As a result of plasticizer absence no material built-up or steam occurs during processing of BIOPLAST WRAP 100. The complete biodegradability and other functional properties of BIOPLAST WRAP 100 enable the converter to advance in production areas, which could not be reached with traditional thermoplastic materials or paper. The potato starch used for BIOPLAST WRAP 100 is native and not blended with plasticizer (which would be necessary for example to produce thermoplastic starch, TPS). BIOPLAST WRAP 100 therefore exhibits outstanding processing- and performance-characteristics as well as an excellent shelf life.&&

Product Description
Generic热塑性聚酯
Material StatusCommercial: Active
FeaturesGood heat sealing,Renewable resources,Low or no water absorption,Good Printability,Biodegradable,Food contact compliance,Good Ultrasonic Properties,Grease resistance,Good coloring
AvailabilitysEurope

Technical Data
filmNominal valueUnitTest method
film thickness
test> 10µmISO 2286-3
tensile strengthISO 527-3
MD,23℃,10 µm10.0 to 20.0MPa
TD,23℃,10 µm10.0 to 20.0MPa
Oxygen permeability (wet) (20 µ m)1000 to 1500cm³/m²/24 hrASTM F1927
Water vapor transmittance
20 µm150 to 190g/m²/24 hrASTM F1249

PHYSICALNominal valueUnitTest method
Density1.30 to 1.50g/cm³ISO 1183/A
Apparent density0.85 to 0.95g/cm³ISO 60
Melt Flow Rate
190℃,2.16kg10 to 20g/10minISO 1133
water content%Internal Method
Particle size1.00 to 3.00mm
Melt density1.20 to 1.40g/cm³ISO 1133

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.