| About |
|---|
| 系采用美国联碳公司(现Univation)的气相流化床聚乙烯专利技术,2004年10月装置进行冷凝态工艺技术改造。以乙烯为原料，1-丁烯或1-己烯为共聚单体，氢气为分子量调节剂.经原料精制、催化剂配制、聚合反应、共聚单休回收、造粒、掺混及后处理等单元生产线型低密度聚乙烯产品产品。可广泛用于吹塑薄膜、流延膜、注塑、吹塑、管材料、电线和电缆绝缘料等领域。生产能力10万吨/年. |
| Product Description | |
|---|---|
| Supplier | Maoming |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Low density |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 2 | g/10min | GB/T 3682-2000 |
| Density | 0.92 | g/cm³ | GB/T 1033.2-2010 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| yld | 8 | MPa | GB/T1040.2-2006 |
| brk | 12 | MPa | GB/T1040.2-2006 |
| Tensile Strain | |||
| brk | 400 | % | GB/T1040.2-2006 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |