DIOSHY® LP-845

About
DIOSHY® LP-845 is a Styrene Ethylene Butylene Styrene Block Copolymer + SBS (SEBS+SBS) material. It is available in Asia Pacific.&&

Product Description
Supplier	DIOSHY
Generic	SEBS+SBS
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.06	g/cm³	JIS K6301
Melt Flow Rate
190℃，2.16kg	10	g/10min	JIS K7210

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	45		JIS K6301

elastic body	Nominal value	Unit	Test method
tensile strength			JIS K6310
100% strain	0.686	MPa	JIS K6310
300% strain	0.490	MPa	JIS K6310
tensile strength	2.55	MPa	JIS K6310
Tensile strain
fracture	630	%	JIS K6310
tear strength	17	kN/m	JIS K6310
Compression deformation
23℃，22 hr	15	%	JIS K6301

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.