Polytron® P20B06

About
Polytron P20B06 is Black, 20% Long Glass Fiber , Ultra Heat Stabilized POLYPROPYLENE, The Glass Fibers are Chemically Coupled to the Polymer Matrix, The material is supplied in pellets that are typically 12mm in length. Fiber length is the length of the pellets. Typical applications include Structural Automotive Applications , For Under the Hood Applications which reqiure ultra high heat stabilzation

About

Polytron P20B06 is Black, 20% Long Glass Fiber , Ultra Heat Stabilized POLYPROPYLENE, The Glass Fibers are Chemically Coupled to the Polymer Matrix, The material is supplied in pellets that are typically 12mm in length. Fiber length is the length of the pellets. Typical applications include Structural Automotive Applications , For Under the Hood Applications which reqiure ultra high heat stabilzation

Product Description
Supplier	Ram-On
Generic	PP not specified
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.03	g/cm³	ISO 1183
Shrinkage rate
TD：2.0 mm	0.40 to 0.50	%
TD：2.0 mm	0.10 to 0.20	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus
—	5700	MPa
70℃	3500	MPa
Tensile stress
—	90.0	MPa
150°C	65.0	MPa
Tensile strain
fracture	2.5	%
Fracture, 150 ℃	2.7	%
Bending modulus	5300	MPa	ISO 178
Bending stress	140	MPa	ISO 178

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
—	15	kJ/m²
-40℃	14	kJ/m²
Charpy Unnotch Impact strength
—	40	kJ/m²
-40℃	35	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	158	℃	ISO 75-2/B
1.8 MPa, unannealed	150	℃	ISO 75-2/A
Melting temperature	168	℃	ISO 11357-3

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level
3.00 mm	HB		UL 94
Flammability	< 100	mm/min	FMVSS 302

Process Conditions
Injection	Nominal value	Unit	Test method
Temperature at the rear of the barrel	230 to 250	°C
Temperature in the middle of the barrel	230 to 250	°C
Front temperature of material barrel	230 to 250	°C
Mold temperature	50 to 70	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.