| About |
|---|
| General Description LG Chem PE1311 is a Emulsion PVC for plastisol suitable for very high viscosity plastisol processing. Main Applications Automotive UBC & sealant Control viscosity of plastisols (Increase viscosity) Advantages High-viscosity and pseudoplastic rheological behaviour Very fine particle&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PVC homopolymer |
| Material Status | Commercial: Active |
| Features | Foaming performance,Homopolymer |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Dipping coating method |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| volatility | |||
| 1 hr，110℃ | < 0.20 | % | ASTM D3030 |
| Aggregation degree | |||
| 30℃ | 1200 to 1300 | JIS K6720-2 | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent density | 0.31 to 0.41 | g/cm³ | ASTM D1895 |
| K-Value | 71.0 | ISO 1628-2 | |
| Sever Viscosity | > 3000.00 | g/10 min | ASTM D3030 |
| Brookfield viscosity | 10.0 to 60.0 | Pa·s | ASTM D1824 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. DOP 90part, 20 rpm |
| 3. DOP 90 part, 4 bar |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |