| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Dimensional Stability |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Flexural strength | |||
| Flame retardant grade (0.25 mm) | 60 | ASTM D2176-69 | |
| 0.50 mm | 20 | ASTM D2176-69 | |
| Tensile strain | |||
| fracture | 100-156 | % | ISO 527 |
| Tensile modulus | |||
| 0.43 mm | 2506 | MPa | ISO 527 |
| tensile strength | |||
| maximum | 65 | MPa | ISO 527 |
| yield | 62 | MPa | ISO 527 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -135 | ℃ | ASTM D746 |
| Hot deformation temperature | |||
| 1.8 MPa | 145 | ℃ | ISO 75 |
| Vicat Softening Temp | |||
| B120 | 160 | ℃ | ASTM D1525 |
| Glass transition temperature | 153 | ℃ | ISO 11357 |
| Thermal conductivity coefficient | 0.2 | W/m/K | ASTM D5470 |
| Linear coefficient of thermal expansion | 5.8E-5 | /℃ | ISO 11359 |
| specific heat | |||
| 25℃ | 1.25 | KJ/Kg/°C | ASTM E1269 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Water absorption rate | |||
| 24hr | 0.35 | % | ISO 62 |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| 150℃ | 1.40 | % | ASTM D1204 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |