TECHNYL® B 218L V20 GREY 2527A CF

About
TECHNYL® B 218L V20 Black 44 N is a copolyamide 66/6, reinforced with 20% of glass fibre, heat stabilized with improved UV ageing resistance, for injection moulding. This grade offers an excellent combination of thermal and mechanical properties, good surface aspect and good UV resistance.&&

Product Description
Supplier	DOMO
Generic	PA66/6
Material Status	Commercial: Active
Features	Good stripping performance,Good surface appearance,Good liquidity,Heat Stabilized,Weather resistance is good
Availabilitys	Europe,Africa & Middle East
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.29	g/cm³
Water absorption rate
23℃，24hr	1.2	%

MECHANICAL	Nominal value	Unit
Tensile modulus
23℃	7000	MPa
tensile strength
Fracture, 23 ℃	120	MPa
Tensile strain
Fracture, 23 ℃	2.1	%
Bending modulus
23℃	5800	MPa

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
23℃	3.2	kJ/m²
Charpy Unnotch Impact strength
23℃	30	kJ/m²

THERMAL	Nominal value	Unit
Hot deformation temperature
1.8 MPa, unannealed	211	℃
Melting temperature	242	℃

FLAME CHARACTERISTICS	Nominal value	Unit
Flame retardant level
0.80 mm	HB
1.60 mm	HB
Extreme oxygen index	23	%

Process Conditions
Injection	Nominal value	Unit	Test method
Injection instructions	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	255 to 265	°C
Temperature in the middle of the barrel	260 to 270	°C
Front temperature of material barrel	270 to 280	°C
Mold temperature	70 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.