| About |
|---|
| KYDEX® 5555 is specifically formulated to meet the safety needs of the aviation industry.&& |
| Product Description | |
|---|---|
| Supplier | Sekisui |
| Generic | PMMA+PVC |
| Material Status | Commercial: Active |
| Features | Clean,Flame Characteristics,Solvent resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Thermo forming |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.52 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed, 3.18 mm | 75.9 | ℃ | ASTM D648 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| > 0.71 mm | Pass | FAR 25.853(a | |
| Heat release rate | <55/55 | FAR 25.853(d | |
| Smoke generation | < 150 | FAR 25.853(d |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Temperature of hot forming mold | 170 to 200 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-grade, 3.18 mm | 111 | ASTM D785 | |
| tensile strength | |||
| 3.18 mm | 43.0 | MPa | ASTM D638 |
| Bending modulus | |||
| 3.18 mm | 3830 | MPa | ASTM D790 |
| bending strength | |||
| 3.18 mm | 81.2 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |