TAISOX 6520G

About
TAISOX® 6520G is a Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of TAISOX® 6520G are: Good Adhesion Good Processability Typical applications include: Coating Applications Foam&&

Product Description
Supplierfpc-tw
GenericLDPE
Material StatusCommercial: Active
FeaturesExcellent Processability,Low shrinkage,Good bond,Low density
AvailabilitysNorth America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density0.916g/cm³ASTM D1505
Melt Flow Rate
190℃,2.16kg8.0g/10minASTM D1238
ESCR(Environmental Stress Cracking Resistance)43.0hrASTM D1693

THERMALNominal valueUnitTest method
Embrittlement temperature-70.0ASTM D746
Vicat Softening Temp85.0ASTM D1525
Melting temperature105

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D52 ASTM D2240
tensile strength ASTM D638
yield8.83MPaASTM D638
fracture10.8MPaASTM D638
Tensile strain
fracture500%ASTM D638
Bending modulus108MPaASTM D790

Process Conditions
injectionNominal valueUnitTest method
Processing (melt) temperature270 to 340°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.