| About |
|---|
| The LTP Series is your material solution for sealings requiring high temperature resistance. The compounds are characterized by an excellent adhesion to PP. Typical applications Fastenings Grommets Seals Material advantages Adhesion to PP Excellent heat resistance up to 140 °C Excellent hysteresis behaviour Excellent mechanical properties Exceptional long-term compression set&& |
| Product Description | |
|---|---|
| Supplier | KRAIBURG |
| Generic | SEPS |
| Material Status | Commercial: Active |
| Features | High Heat Resistance,Good bond |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.05 | g/cm³ | ISO 1183 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 5.00 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 400 | % | ISO 37 |
| tear strength | 15 | kN/m | ISO 34-1 |
| Compression deformation | ISO 815 | ||
| 23℃，72 hr | 13 | % | ISO 815 |
| 70℃，24 hr | 35 | % | ISO 815 |
| 100℃，24 hr | 38 | % | ISO 815 |
| 120℃，24 hr | 41 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 60 | ISO 7619 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 60 to 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 180 | °C | |
| Barrel middle temperature | 200 | °C | |
| Barrel front temperature | 220 | °C | |
| Mold temperature | 25 to 40 | °C | |
| Injection pressure | 20.0 to 100 | MPa | |
| Back pressure | 2.00 to 10.0 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |