PPH-T03(T30S)

About

Product Description
GenericPP not specified
Material StatusCommercial: Active

Technical Data
PHYSICALNominal valueUnitTest method
Melt Flow Rate2.9g/10min

MECHANICALNominal valueUnitTest method
Tensile modulus of elasticity1155.1MPa
Tensile yield stress36.5MPa
Tensile fracture nominal strain504%

Other performanceNominal valueUnitTest method
Large and small grains0.38g/kg
Black granules0个/kg
Snakeskin and tailfish86个/kg
Isometric index97.5%
ash content200mg/kg
Yellow index-1.18
fisheye7个/1520cm²0.4mm

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.