3M™ Dyneon™ Perfluoroelastomer PFE 301Z

About
Features and Benefits Phosphorous-free and silica-free formulation reduces the potential for contamination Optically transparent Excellent plasma resistance with low particle count Low extractables, low outgassing, and low particle generation for ultra high purity applications Excellent temperature resistance optimizes performance in extreme environments (continuous, in-service temperatures to 300°C with peaks up to 350°C) Excellent compression set offers enhanced sealing force retention and seal life Smaller, easy to store packages for cleanroom handling Proportionate polymer and catalyst simplify the mixing process&&

About

Features and Benefits Phosphorous-free and silica-free formulation reduces the potential for contamination Optically transparent Excellent plasma resistance with low particle count Low extractables, low outgassing, and low particle generation for ultra high purity applications Excellent temperature resistance optimizes performance in extreme environments (continuous, in-service temperatures to 300°C with peaks up to 350°C) Excellent compression set offers enhanced sealing force retention and seal life Smaller, easy to store packages for cleanroom handling Proportionate polymer and catalyst simplify the mixing process&&

Product Description
Generic	PFE
Material Status	Commercial: Active
Features	Low extract,High purity,Good Compression Set,High Heat Resistance,Low odor,Low to no phosphorus content
Availabilitys	North America,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.09	g/cm³
Mooney viscosity
ML 1+10，121℃	110	MU
Fluorine content	73	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	72		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	19.0	MPa	ASTM D412
100% strain	3.59	MPa	ASTM D412
Tensile strain
fracture	260	%	ASTM D412
Compression deformation
230℃，70 hr	21	%
230℃，168 hr	29	%
230℃，336 hr	33	%
250℃，70 hr	26	%
250℃，168 hr	33	%
250℃，336 hr	40	%
275℃，70 hr	32	%
275℃，168 hr	38	%
275℃，336 hr	52	%
MH	0.667	J
ML	0.215	J
t’50	2.2	min
t’90	5.8	min
ts2	2.2	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.