| About |
|---|
| XIRAN® IZ0325M is an amorphous thermoplastic random SMANPMI (styrene maleic anhydride N-Phenylmaleimide) terpolymer. XIRAN® IZ0325M is typically added to other engineering plastics to increase: thermal stability dimensional stability Application areas XIRAN® IZ0325M is specifically designed as an additive to increase the thermal properties of several engineering plastics especially in styrenic like ABS&& |
| Product Description | |
|---|---|
| Generic | Styrene-maleic anhydride copolymer |
| Material Status | Commercial: Active |
| Features | Good Dimensional Stability,Heat Stabilized,Amorphous |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.60 | g/cm³ | Internal Method |
| Melt Flow Rate | |||
| 265℃，10.0kg | 70 | g/10min | ISO 1133 |
| Maleic anhydride content | |||
| Calculated | 4.0 | % | Internal Method |
| Molecular Weight（Calculated） | 160000 | g/mol | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 181 | ℃ | ISO 3146 |
| thermal stability | 400 | ℃ | TGA |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 to 3.0 | hr | |
| Barrel rear temperature | 240 | °C | |
| Barrel middle temperature | 240 | °C | |
| Barrel front temperature | 240 | °C | |
| Nozzle temperature | 260 | °C | |
| Processing (melt) temperature | < 320 | °C | |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 to 3.0 | hr | |
| Barrel 1 zone temperature | 240 | °C | |
| Barrel 2 zone temperature | 240 | °C | |
| Barrel 3 zone temperature | 240 | °C | |
| Barrel 4 zone temperature | 240 | °C | |
| Barrel 5 zone temperature | 240 | °C | |
| Nozzle temperature | 260 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |