ICORENE® 9035

About
ICORENE™ 9035 is a linear medium density polyethylene which exhibits a good balance of moulding and mechanical performance. This grade is suited to general purpose industrial parts while offering more rigidity compared with ICORENE™ 9048. ICORENE™ 9035 contains a fully formulated UV stabilisation package (with a minimum UV8 rating). The base resin in ICORENE™ 9035 is suitable for food contact applications, including conformance to FDA 21CFR177.1520 and EU Commission Directive 202/72/EC. For detailed information on compliance to specific standards please contact your account manager. ICORENE™ 9035 is available in a range of standard colours or as custom colours on request.&&

About

ICORENE™ 9035 is a linear medium density polyethylene which exhibits a good balance of moulding and mechanical performance. This grade is suited to general purpose industrial parts while offering more rigidity compared with ICORENE™ 9048. ICORENE™ 9035 contains a fully formulated UV stabilisation package (with a minimum UV8 rating). The base resin in ICORENE™ 9035 is suitable for food contact applications, including conformance to FDA 21CFR177.1520 and EU Commission Directive 202/72/EC. For detailed information on compliance to specific standards please contact your account manager. ICORENE™ 9035 is available in a range of standard colours or as custom colours on request.&&

Product Description
Generic	LMDPE
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good flexibility,Good surface appearance,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.935	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	5.0	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent	> 300	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Izod notched impact strength	54	J	ARM

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	115	℃	ASTM D1525

Supplementary information	Nominal value	Unit	Test method
UV Rating	8000	hr	ASTM 2565

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	55		ASTM D2240
tensile strength
yield	17.0	MPa	ASTM D638
Tensile strain
fracture	> 700	%	ASTM D638
Bending modulus	720	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.