| About |
|---|
| Medalist MD-10233 is a high performance thermoplastic elastomer specifically designed for healthcare and medical applications. Medalist MD-10233 is a low hardness, low density, halogen-free grade that can be sterilized and is suitable for cast films and extrusion. |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | No viscosity,Excellent Processability,Good flexibility,Good surface appearance,Low liquidity,High elastic,Good Printability,Halogen free,Low Hardness,High pressure disinfection,Good bond,Elastic,Good Tensile Strength,Low density,Radiation disinfection,Good wear resistance,Solvent resistance,Puncture Resistant,Ethylene oxide disinfection,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.898 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 1.5 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 1 second, injection molding | 35 | ||
| Shore A, 5 seconds, injection molding | 33 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 11.9 | MPa | ASTM D412 |
| 100% strain | 0.827 | MPa | |
| 300% strain | 2.41 | MPa | |
| Tensile strain | |||
| fracture | 760 | % | ASTM D412 |
| tear strength | 36.8 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 12 | % | |
| 70℃，22 hr | 91 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -60.0 | ℃ | ASTM D746 |
| Legal Statement | Nominal value | Unit | Test method |
|---|---|---|---|
| Process Conditions | |||
|---|---|---|---|
| Squeeze description | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 193 to 204 | °C | |
| Barrel 2 zone temperature | 199 to 210 | °C | |
| Barrel 3 zone temperature | 210 to 221 | °C | |
| Barrel 4 zone temperature | 210 to 227 | °C | |
| Nozzle temperature | 210 to 227 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |