| About |
|---|
| Mixed linear and branched phthalate ester&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | PAEs(增塑剂) |
| Material Status | Commercial: Active |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.965 to 0.971 | g/cm³ | ASTM D4052 |
| water content | |||
| Maximum value | 1000 | ppm | ASTM D1533 |
| acid value | |||
| Maximum value | 0.10 | mg KOH/g | ASTM D1045 |
| exterior | 清洁，干净 | ASTM D2090 | |
| colour | 35 | ASTM D1209 | |
| Ester content | |||
| minimum value | 99.0 | % | ASTM D3465 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Casting point | -48 | ℃ | ASTM D97 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 25/25°C |
| 3. Pt-Co Scale, Maximum |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |