| About |
|---|
| Injection Molding grade, Light diffusion grade, Weather resistance, Flame resistance&& |
| Product Description | |
|---|---|
| Supplier | TEIJIN |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Low Light Diffusion,Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD | 0.50-0.70 | % | ISO 294-4 |
| TD | 0.50-0.70 | % | ISO 294-4 |
| Melt Flow Rate | |||
| 300℃ | 18 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 68 | MPa | ISO 527-2 |
| Tensile strain | |||
| Fracture, 23 ℃ | 105 | % | ISO 527-2 |
| bending strength | |||
| 23℃ | 99 | MPa | ISO 178 |
| Bending modulus | |||
| 23℃ | 2400 | MPa | ISO 178 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Transmittance | 85 | % | ISO 13468-2 |
| Haze μ M | 17 | % | ISO 13468-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 129 | ℃ | ISO 75-2/Af |
| Linear coefficient of thermal expansion | |||
| MD | 0.7E-4 | 1/℃ | ISO 11359-2 |
| TD | 0.7E-4 | 1/℃ | ISO 11359-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.00mm | V-2 | UL 94 | |
| 3.00mm | V-2 | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 10 | kJ/m² | ISO 180-1A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |