| About |
|---|
| Kumho KBR 01 is a High Cis Polybutadiene Rubber material. It is available in Asia Pacific, Europe, or North America. Important attributes of Kumho KBR 01 are: Stabilized Wear Resistant Weather Resistant Typical applications include: Automotive Consumer Goods Engineering/Industrial Parts Hose/Tubing Sporting Goods&& |
| Product Description | |
|---|---|
| Supplier | Kumho Petrochemical |
| Generic | PBR顺式 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Elastic,Good wear resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.908 | g/cm³ | ASTM D792 |
| Mooney viscosity | |||
| ML 1+4，100℃ | 45 | MU | |
| ML 1+4，100℃ | 55 | MU | ASTM D3189 |
| 1,4 cis content | > 94.0 | wt% | |
| Ash Content | < 0.20 | % | |
| Volatiles | < 0.50 | % | |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 19.4 | MPa | |
| 300% strain | 8.92 | MPa | |
| Tensile strain | |||
| fracture | 540 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -73.3 | ℃ |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Monsanto ODR | |||
| 160℃ | 5.9 | kN/m | |
| 160℃ | 3.8 | min | |
| 160℃ | 8.5 | min | |
| 160℃ | 1.5 | kN/m | |
| 160℃ | 11.3 | min |
| Notes |
|---|
| 1. Non-staining |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Compounded Rubber |
| 4. Press cured 35 min at 145°C |
| 5. ARC ±1°, T’ 90 |
| 6. ARC ±1°, MH |
| 7. ARC ±1°, ML |
| 8. ARC ±1°, TS 01 |
| 9. ARC ±1°, T’ 50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |