AXELERON™ CC B-3487 NT CPD

About
AXELERON™ CC B-3487 NT CPD is a high-density polyethylene cellular compound (“CPD”) designed for use in foam/skin telephone wire and other cellular insulation applications. This compound incorporates a chemical blowing agent that provides up to 50% cellular expansion through temperature-controlled extrusion. AXELERON™ CC B-3487 NT CPD features a unique antioxidant system that provides superior long-term insulation aging performance in grease-filled cable applications. The compound is recommended for hot climate applications and, using sound commercial extrusion practices, should meet the stringent insulation age testing requirements of the Telcordia GR 421 CORE and the ICEA S-84-608 specifications. AXELERON™ CC B-3487 NT CPD provides excellent extrusion processing characteristics and yields an insulation product with superior mechanical and electrical performance.&&

About

AXELERON™ CC B-3487 NT CPD is a high-density polyethylene cellular compound (“CPD”) designed for use in foam/skin telephone wire and other cellular insulation applications. This compound incorporates a chemical blowing agent that provides up to 50% cellular expansion through temperature-controlled extrusion. AXELERON™ CC B-3487 NT CPD features a unique antioxidant system that provides superior long-term insulation aging performance in grease-filled cable applications. The compound is recommended for hot climate applications and, using sound commercial extrusion practices, should meet the stringent insulation age testing requirements of the Telcordia GR 421 CORE and the ICEA S-84-608 specifications. AXELERON™ CC B-3487 NT CPD provides excellent extrusion processing characteristics and yields an insulation product with superior mechanical and electrical performance.&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.945	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	0.80	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength	22.1	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638

THERMAL	Nominal value	Unit	Test method
Heat resistant stress cracking	> 96	hr	ASTM D2951
Oxygen sensing time
220℃	47	min	ASTM D3895

Electrical performance	Nominal value	Unit	Test method
Volume resistivity
23℃	> 1.0E+15	ohms·cm	ASTM D257
Dielectric constant
1 MHz	2.34		ASTM D1531
Dissipation factor
1 MHz	3.0E-4		ASTM D1531

Notes
1. Typical properties: these are not to be construed as specifications.
2. Solid
3. Aluminum Pan
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.