3M™ Dyneon™ Fluoroelastomer FX 3734

About
3M™ Dyneon™ Fluoroelastomer FX 3734 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FX 3734 has an incorporated bisphenol cure system. Special Features Composition: terpolymer of hexafluoropropylene, tetrafluoroethylene and vinylidene fluoride Process targets: compression, injection and transfer moulding High elongation Targeted for bonded shaft seal applications Proprietary incorporated cure technology Good compression set resistance Typical Applications 3M™ Dyneon™ Fluoroelastomer FX 3734 is suitable for bonded seals, e.g. shaft seals for automotive and industrial applications.&&

About

3M™ Dyneon™ Fluoroelastomer FX 3734 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. FX 3734 has an incorporated bisphenol cure system. Special Features Composition: terpolymer of hexafluoropropylene, tetrafluoroethylene and vinylidene fluoride Process targets: compression, injection and transfer moulding High elongation Targeted for bonded shaft seal applications Proprietary incorporated cure technology Good compression set resistance Typical Applications 3M™ Dyneon™ Fluoroelastomer FX 3734 is suitable for bonded seals, e.g. shaft seals for automotive and industrial applications.&&

Product Description
Generic	氟橡胶
Material Status	Commercial: Active
Features	Good Tensile Strength,Terpolymer
Availabilitys	North America,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.86	g/cm³	Internal Method
Mooney viscosity
ML 1+10，121℃	49	MU	Internal Method
Fluorine content	69	%	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	74		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	15.8	MPa	ASTM D412A
100% strain	4.50	MPa	ASTM D412A
Tensile strain
fracture	260	%	ASTM D412A
Compression deformation			ASTM D1414
200℃，70 hr	31	%	ASTM D1414
200℃，70 hr	25	%	ASTM D1414

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.