| About |
|---|
| GOST / TU: TU 2243-167-00203335-2006 Additives: thermal stabilizer and copper deactivator. Resistant to hydrophobic filling impact intended for cable conductors’ insulation. This grade is produced in natural color pellets.&& |
| Product Description | |
|---|---|
| Supplier | Joint |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Low or no water absorption,Copper contact stability,Heat Stabilized |
| Availabilitys | Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 to 0.925 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 to 0.40 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | > 500 | hr | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | > 9.80 | MPa | |
| Tensile strain | |||
| fracture | > 600 | % |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | |||
| 1 mm | > 40 | kV/mm | |
| Relative permittivity | |||
| 1 MHz | 2.30 | ||
| Dissipation factor | |||
| 1 MHz | < 2.0E-4 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Impurities | 3.00 to 15.0 | count/g | |
| tear strength | > 13.7 | MPa | |
| Thermal oxidation deterioration | > 6.0 | hr |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |