DGDK-6862 NT

About
Dow™ Electrical & Telecommunications DGDK-6862 NT Polyethylene Resin for Self coloring Jackets is a high density Polyethylene resin that can be used as a cable jacketing material when properly colored and stabilized. The material exhibits properties such as high hardness, toughness, tensile strength and heat resistance in combination with good flexibility, excellent environmental stress crack resistance and good processing properties. Due to the unique combination of HDPE and MDPE properties, DGDK-6862 NT is an excellent material for power cable and telecommunications cable jackets. Applications. DGDK-6862 NT is a natural resin that needs to be blended with a carbon black or color masterbatch with a suitable U.V.-stabilizer to ensure sufficient weathering resistance. The addition of a suitable antioxidant level is required for ageing resistance. A carbon black masterbatch with extra antioxidant for use with DGDK-6862 NT is Dow™ Electrical & Telecommunications DFDK-6010 BK. The jacket can be used for power cables and telecommunication cables including fiber optic cables. Storage. The environment or conditions of storage greatly influences the recommended storage time. Storage under extreme conditions may affect the quality, processing or performance of the product. Storage should be in accordance with good manufacturing practices such as a dry environment and storage temperatures between 10 and 30°C. Main Characteristics: High Vicat softening point Good flexibility Excellent ESCR Low shrinkage Specifications. The polymeric material meets the following raw material specification(s): ASTM D 1248 Type III, Class A, Category 4, Grade J4 ISO 1872-PE, KGN, 40-D006 In combination with a proper carbon black or colour masterbatch cable jackets made of Dow™ Electrical and Telecommunications DGDK-6862 NT, using industry standard extrusion practices, should meet the following cable standards: EN 50290-2-24, grade HD IEC 60502 ST7 IEC 60840 ST7 HD 620 S2 Part 1, Table 4B, Compound DMP 2, 9, 10, 14, 15, 17 (black) and DMP 5, 13, 16, 18 (coloured) Consult the regulations for complete details.&&

Product Description
SupplierDOW
GenericHDPE
Material StatusCommercial: Active
AvailabilitysEurope

Technical Data
PHYSICALNominal valueUnitTest method
Density0.941g/cm³ISO 1183
Melt Flow Rate
190℃,2.16kg0.80g/10minISO 1133
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 10% non-ionic surfactant, F0> 1000hrIEC 60811

THERMALNominal valueUnitTest method
Embrittlement temperature< -70.0ASTM D3895
Vicat Softening Temp
A50122ISO 306/A50

Electrical performanceNominal valueUnitTest method
Volume resistivity
23℃> 2.0E+16ohms·cmIEC 60093
Dielectric constant
1 MHz2.30 IEC 60250

MECHANICALNominal valueUnitTest method
Shore hardness
Shore D, 15 seconds60 ISO 868
tensile strength28.0MPaIEC 60811-501
Tensile strain 
fracture730%IEC 60811-501
fracture720%IEC 60811-401
Bending modulus750MPaISO 178

Process Conditions
ExtrusionNominal valueUnitTest method
Melt temperature< 250°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. After ageing 10 days @100°C (212°F)
3. Notched, F0
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.