ASPUN™ 6834 - SOLIAO

About
ASPUN 6834 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment (Mono and Bico configuration). Commercial uses are in the non-woven areas offering excellent softness and drapability, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Commercially in Staple Fibers it is used for low bonding fibers as bicomponent sheath. Note: ASPUN 6834 Fiber Grade Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: Housewares Textiles & Fibers Health & Hygiene Automotive Interiors Medical Packaging&&

About

ASPUN 6834 Fiber Grade Resin is a product suitable for use in staple fiber and spunbond production equipment (Mono and Bico configuration). Commercial uses are in the non-woven areas offering excellent softness and drapability, direct thermal bonding of fabric to fabric or fabric to polyethylene film. Commercially in Staple Fibers it is used for low bonding fibers as bicomponent sheath. Note: ASPUN 6834 Fiber Grade Resin should comply with FDA regulation 177.1520 and with most European food contact regulations when used unmodified and processed according to good manufacturing practices for food contact applications. Please, contact your nearest Dow office for food contact compliance statements. The purchaser remains responsible for determining whether the use complies with all relevant regulations. Applications: Housewares Textiles & Fibers Health & Hygiene Automotive Interiors Medical Packaging&&

Product Description
Supplier	DOW
Generic	Linear low density polyethylene
Material Status	Commercial: Active
Availabilitys	Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	17	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	130	℃	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.