Mapex N0320FN 01

About
Mapex N0320FN 01 is a Polyamide 6 (Nylon 6) product filled with 18% glass fiber. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, or North America. Characteristics include: Flame Rated RoHS Compliant Flame Retardant&&

Product Description
Supplier	Ginar Technology
Generic	PA6
Material Status	Commercial: Active
Features	Flame Characteristics
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.46	g/cm³	ASTM D792
Shrinkage rate
MD：3.0 mm	0.20 to 0.40	%	ASTM D955
Water absorption rate
23℃，24hr	1.7	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	69	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	210	℃	ASTM D648
Melting temperature	220	℃	ASTM D789
Linear coefficient of thermal expansion
MD	6.0E-5	1/℃	ASTM D696

Electrical performance	Nominal value	Unit	Test method
Dielectric strength	23	kV/mm	ASTM D149

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
0.79 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ASTM D785
tensile strength
yield	107	MPa	ASTM D638
Tensile strain
fracture	3.0	%	ASTM D638
Bending modulus	65500	MPa	ASTM D790
bending strength	183	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.