| About |
|---|
| Terraloy BP-10001A is a Thermoplastics Starch/LLDPE ready-to-process compound that contains up to 30% of TPS renewable content. This compound is for blown film application.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPS+LLDPE |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ASTM D792 |
| Biomass content | < 30.0 | ||
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| MD | 193 | MPa | ASTM D882 |
| TD | 288 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, fracture | 53.0 | MPa | ASTM D882 |
| TD, fracture | 30.9 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 480 | % | ASTM D882 |
| TD, fracture | 680 | % | ASTM D882 |
| Drop hammer impact | 450 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD | 320 | g | ASTM D1922 |
| TD | 620 | g | ASTM D1922 |
| Oxygen transfer rate | 7100 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor permeability | 9.0 | g/m²/24 hr | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |