| About |
|---|
| PA-BOND 363C is a Maleic Anhydride Modified Copo-polypropylene recommended for coupling of glass and other fillers in polypropylene composites. Recommended Dosage Dose is 1-4% recommended to blend with PP and other fillers as a coupling agent. Above recommendations depend on the thickness of appliances, material contact and on the climate.&& |
| Product Description | |
|---|---|
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.900 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 100 | g/10min | |
| Maleic anhydride content | 1.0 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 160 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |