UBE Nylon 1022 FDX99

About
UBE NYLON 1022 FDX99 is a medium viscosity, nucleated Polyamide 6. The material is suitable for cast film and air-cooled blown film production.&&

Product Description
Supplier	UBE
Generic	PA6
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Nucleation,Low smoothness
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ASTM D792

MECHANICAL	Nominal value	Test method
friction coefficient		ASTM D1894
With oneself – dynamic	1.0	ASTM D1894
With oneself – static	1.0	ASTM D1894

film	Nominal value	Unit	Test method
Secant modulus
MD, cast thin film	650	MPa	ASTM D882
tensile strength			ASTM D882
MD, yield, extruded film	32.0	MPa	ASTM D882
MD, fracture, extruded film	110	MPa	ASTM D882
Tensile strain
MD, fracture, extruded film	600	%	ASTM D882

THERMAL	Nominal value	Unit	Test method
Melting temperature	215	℃	DSC

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+15	ohms	ASTM D257

optical performance	Nominal value	Unit	Test method
gloss	155		ASTM D523
Haze	0.50	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.