CERTENE™ EDI-240

About
EDI-240 is a certified prime grade 19 % VINYL ACETATE-ETHYLENE copolymer designed for specialized molding applications requiring excellent toughness, resilience and strength properties. EDI-240 features high molecular weight, high melt viscosity, good processability, crosslinkability, and easy foamability. Molded parts exhibit high impact strength, exceptional resistance to low temperature brittleness, high elasticity, and outstanding sealability. EDI-240 applications include tough, lightweight, scuff resistant athletic footwear wedges, midsoles and outsoles, flexible tubing and hose, automotive parts, sportive articles and as blend component for property improvement with PE, PP, SBR, and other polymers. EDI-240 complies with FDA regulation 21CFR 177.1350 (a) + (b) concerning Ethylene-Vinyl Acetate copolymers use in contact with food articles, subject to restrictions: 1) may not be used for contact with food containing more than 0.5% alcohol, and: 2) may not be used in materials for food packaging exceeding 10 mils (250 µ) thickness.&&

About

EDI-240 is a certified prime grade 19 % VINYL ACETATE-ETHYLENE copolymer designed for specialized molding applications requiring excellent toughness, resilience and strength properties. EDI-240 features high molecular weight, high melt viscosity, good processability, crosslinkability, and easy foamability. Molded parts exhibit high impact strength, exceptional resistance to low temperature brittleness, high elasticity, and outstanding sealability. EDI-240 applications include tough, lightweight, scuff resistant athletic footwear wedges, midsoles and outsoles, flexible tubing and hose, automotive parts, sportive articles and as blend component for property improvement with PE, PP, SBR, and other polymers. EDI-240 complies with FDA regulation 21CFR 177.1350 (a) + (b) concerning Ethylene-Vinyl Acetate copolymers use in contact with food articles, subject to restrictions: 1) may not be used for contact with food containing more than 0.5% alcohol, and: 2) may not be used in materials for food packaging exceeding 10 mils (250 µ) thickness.&&

Product Description
Generic	EVA
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Good flexibility,High impact resistance,High Viscosity,Crosslinked,High elastic,Foaming performance,High molecular weight,Elastic,Copolymer
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	ASTM D150
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Fracture, molded	15.2	MPa	ASTM D638
Yield, molding	4.83	MPa	ASTM D638
Tensile strain
Fracture, molded	> 800	%	ASTM D638
Bending modulus
1% cut, molded	51.7	MPa	ASTM D790
Bending stiffness
Compression Molding	34.5	MPa	ASTM D747

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Vicat Softening Temp	64.0	℃	ASTM D1525
Melting temperature	85.0	℃	DSC

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.