| About |
|---|
| MG9601 is a high density polyethylene The grade is characterized by excellent flow properties, minor distortion and high stiffness. Applications: House ware and thin wall packaging Caps and closures Special features: Good flow behaviour High stiffness&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Renewable resources,Good liquidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 31 | g/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 1.0 to 2.0 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 62 | ISO 868 | |
| Tensile modulus | |||
| injection molding | 1250 | MPa | ISO 527-1-2 |
| tensile strength | |||
| Yield, injection molding | 29.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Yield, injection molding | 9.0 | % | ISO 527-2/50 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 2.5 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 71.0 | ℃ | ISO 75-2/B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 180 to 240 | °C | |
| Mold temperature | 10 to 40 | °C | |
| Injection speed | Fast | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |