Techsil® RTV12120

About
Techsil RTV12120 is a one-component, fast cure, non-corrosive silicone adhesive sealant that cures on exposure to atmospheric moisture to form an elastic silicone rubber. RTV12120 has excellent corrosion-free adhesion to metals, including copper, plastics, ceramics, glass, etc. without the use of primers. Key Features and Benefits Non-corrosive to metals: meets MIL-A-46146B corrosion test Fast cure Low odour; releases an alcohol vapour during cure Primerless adhesion to many substrates Excellent high and low temperature resistance: from -55°C to 200°C Excellent weatherability, ozone, and chemical resistance Excellent electrical insulation properties UL94 HB recognized (File No: E56745) Simple and easy-to-use one-component system&&

About

Techsil RTV12120 is a one-component, fast cure, non-corrosive silicone adhesive sealant that cures on exposure to atmospheric moisture to form an elastic silicone rubber. RTV12120 has excellent corrosion-free adhesion to metals, including copper, plastics, ceramics, glass, etc. without the use of primers. Key Features and Benefits Non-corrosive to metals: meets MIL-A-46146B corrosion test Fast cure Low odour; releases an alcohol vapour during cure Primerless adhesion to many substrates Excellent high and low temperature resistance: from -55°C to 200°C Excellent weatherability, ozone, and chemical resistance Excellent electrical insulation properties UL94 HB recognized (File No: E56745) Simple and easy-to-use one-component system&&

Product Description
Generic	硅橡胶,RTV-1
Material Status	Commercial: Active
Features	Weather resistance is good,Antifreeze,Non-corrosiveness,High Heat Resistance,Low odor,Good bond,Ozone resistance,Solvent resistance,Room temperature cure,Insulation,Fast Cure
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³

THERMAL	Nominal value	Unit	Test method
Thermal conductivity coefficient	0.18	W/m/K

Supplementary information	Nominal value	Unit	Test method
Adhesive strength	1.00	MPa

Uncured Properties	Nominal value	Unit
viscosity
23℃	50	Pa·s
Tack Free Time	10	min

Cured Properties	Nominal value	Unit
Shore hardness
Shaw’s A	13
tensile strength	1.20	MPa
Tensile strain
fracture	360	%
Electrical strength	22	kV/mm
Relative permittivity
60 Hz	2.90
Volume resistivity	2.0E+15	ohms·cm
Dissipation factor
60 Hz	5.0E-3

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.