UmaPET AOCMH - SOLIAO

About
KEY FEATURES UmaPET AOCMH is high barrier metallized film, metallized on corona surface other side acrylic coated. It exhibits good barrier properties along with good metal to film bond strength/adhesion. It has excellent mechanical properties, flex crack resistance and excellent gloss. APPLICATIONS UmaPET AOCMH is used as barrier layer in flexible packaging applications which require good barrier and bond strength in laminates. Typical usage as barrier film in laminates for confectionary, snacks, instant drink powder, milk powder, tea, coffee etc.&&

About

KEY FEATURES UmaPET AOCMH is high barrier metallized film, metallized on corona surface other side acrylic coated. It exhibits good barrier properties along with good metal to film bond strength/adhesion. It has excellent mechanical properties, flex crack resistance and excellent gloss. APPLICATIONS UmaPET AOCMH is used as barrier layer in flexible packaging applications which require good barrier and bond strength in laminates. Typical usage as barrier film in laminates for confectionary, snacks, instant drink powder, milk powder, tea, coffee etc.&&

Product Description
Generic	PET
Material Status	Commercial: Active
Features	Good surface appearance,Good bond,Good tear strength,Electroplating,Block resin,Agglomerability
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Shrinkage rate			ASTM D1204
MD：150℃，0.012 mm，30 min	2.5	%
TD：150℃，0.012 mm，30 min	0.40	%
surface tension			ASTM D2578
Acrylic Side：12.0 µm	44	mN/m
Metallized side：12.0 µm	56	mN/m

film	Nominal value	Unit	Test method
film thickness
test	12	µm
film thickness	12 µm
tensile strength			ASTM D882
MD, fracture, 12 µ m	206	MPa
TD, fracture, 12 µ m	216	MPa
Tensile strain			ASTM D882
MD, fracture, 12 µ m	100	%
TD, fracture, 12 µ m	90	%
Oxygen permeability
23℃，12 µm	< 0.700	cm³/m²/24 hr	ASTM D3985
Water vapor permeability	< 0.40	g/m²/24 hr	ASTM F1249
dosage
12.0 µm	59.5	m²/kg	Internal Method

optical performance	Nominal value	Unit	Test method
Optical Density（12.0 µm）	-2.4 to 7.6	%	Internal Method

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.