| About |
|---|
| FT6230 is a tubular, low density, polyethylene grade for the production of packaging film. FT6230 is developed to give films with good optical properties for thin film applications. FT6230 is intended for applications like: Films for use on automated packaging machinery Pouches Fine shrink films Food packaging films FT6230 contains no additives.&& |
| Product Description | |
|---|---|
| Supplier | Borealis AG |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Renewable resources,Optical performance,Low density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.923 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| With oneself – dynamic | 0.60 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | |||
| TD，40 µm | 190 | MPa | ASTM D882 |
| MD，40 µm | 180 | MPa | ASTM D882 |
| tensile strength | ISO 527-3 | ||
| MD，40 µm | 25.0 | MPa | ISO 527-3 |
| TD，40 µm | 20.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, fracture, 41 µ m | 300 | % | ISO 527-3 |
| TD, fracture, 41 µ m | 600 | % | ISO 527-3 |
| Drop hammer impact | |||
| 40 µm | 100 | g | ISO 7765-1 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD：40 µm | 3.0 | N | ISO 6383-2 |
| TD：40 µm | 2.0 | N | ISO 6383-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| A50 | 95.0 | ℃ | ISO 306/A50 |
| Melting temperature | |||
| DSC | 111 | ℃ | ISO 3146 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 1020 µm | 90 | ASTM D2457 | |
| Haze | |||
| 1020 µm | 8.0 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 150 to 180 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |