| 1. Width: .1.50″ to 18.00″ Thickness: .018″ to .080″ Length: 6″ to 120″ strips |
| 2. Also available in roll form with lengths up to 250 ft. |
| 3. Typical properties: these are not to be construed as specifications. |
| 4. 90 degree orientation |
| 5. 0 degree orientation |
| 6. Strength Values developed from ASTM D790 are dependent on thickness. As thickness increased flex strength decreased. The test data above is based on a test thickness of .060″ |
| 7. Inter-laminar, 2,3 direction |
| 8. In-plane, 1,2 direction |
| 9. nu12 (0/90), valid both tensile and compression |
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |
