SABIC® PP 520L

About
SABIC® PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using SABIC® PP 520L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines. TYPICAL APPLICATIONS SABIC® PP 520L can be used for producing garment packaging, textiles packaging, magazine covers and for food packaging.&&

About

SABIC® PP 520L is specially developed for tubular water quenched blown film applications with suitable dosage of slip and antiblock additives. Films produced using SABIC® PP 520L has the following features: Consistent processability; High melt strength; Good optical properties; Excellent runability on bagging and sealing machines. TYPICAL APPLICATIONS SABIC® PP 520L can be used for producing garment packaging, textiles packaging, magazine covers and for food packaging.&&

Product Description
Supplier	SABIC
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Excellent Processability,Smoothness,High anti-blocking,Good melt strength,Homopolymer
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23 ℃, injection molding	23	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	105	℃	ASTM D648
Vicat Softening Temp	155	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	102		ASTM D785
tensile strength
Yield, injection molding	35.0	MPa	ASTM D638
Tensile strain
Yield, injection molding	10	%	ASTM D638
Bending modulus
1% cut, injection molding	1600	MPa	ASTM D790

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	205 to 215	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.