SAUDPOL SP-5119

About
Un-saturated polyester resin. Principal properties Orthophthalic acid based polyester Excellent mechanical properties High performance constructional lamination Rapid curing with no volatiles evolved Light colour Applications Car body parts, yachts, chassis, corrugated sheet General purpose Pipe, fishing rods, ducts&&

Product Description
Generic	热固性聚酯
Material Status	Commercial: Active
Features	Fast Cure
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
acid value	25.00 to 30.00	mg KOH/g
styrene content	35 to 40	%
colour	< 150	APHA

MECHANICAL	Nominal value	Unit
Tensile modulus	4200	MPa
tensile strength	80.0	MPa
Tensile strain
fracture	2.3	%
Bending modulus	4000	MPa
bending strength	150	MPa

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	64	℃

optical performance	Nominal value	Unit	Test method
Refractive index	1.541

Supplementary information	Nominal value	Unit	Test method
exothermic peak	150 to 166	℃

Uncured Properties	Nominal value	Unit
Density
20℃	1.12	g/cm³
viscosity
25℃	0.40 to 0.80	Pa·s
Curing time	0.50 to 0.57	hr
Gelation time	14 to 22	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.